Optimasi Multi-Objektif Proses Pemesinan Milling dengan Metode Taguchi Kolaborasi Grey Relational Analysis
Abstract
This research focus on multi-objective optimization to minimize surface roughness and maximize material removal rate (MRR) on aluminum alloy 6061 T6. The experiment was designed based on the L9 orthogonal array and was carried out by milling machining process. The input parameters selected from the milling machining conditions are spindle speed, feed rate, and depth of cut. The responses obtained from these experiments are surface roughness and material removal rate. To achieve these two objectives simultaneously, the Taguchi method collaboration with of gray relational analysis can be used. The effect of cutting parameters on surface roughness and MRR can be determined using ANOVA and interaction plots. The optimal parameters to achieve minimum surface roughness and maximum MRR are the combination of a spindle speed of 600 rpm, a feed rate of 50 mm/min, and a depth of cut of 0.7 mm.
Downloads
References
M. Moayyedian, A. Mohajer, M. G. Kazemian, A. Mamedov, and J. F. Derakhshandeh, “Surface roughness analysis in milling machining using design of experiment,” SN Appl Sci, vol. 2, no. 10, Oct. 2020, doi: 10.1007/s42452-020-03485-5.
B. K. Roy, Y. P. Korkolis, Y. Arai, W. Araki, T. Iijima, and J. Kouyama, “Plastic deformation of AA6061-T6 at elevated temperatures: Experiments and modeling,” Int J Mech Sci, vol. 216, p. 106943, Feb. 2022, doi: 10.1016/J.IJMECSCI.2021.106943.
L. Bouzid, S. Boutabba, M. A. Yallese, S. Belhadi, and F. Girardin, “Simultaneous Optimization of Surface Roughness and Material Removal Rate for Turning of X20Cr13 Stainless Steel,” International Journal of Advanced Manufacturing Technology, vol. 74, no. 5–8, pp. 879–891, Sep. 2014, doi: 10.1007/s00170-014-6043-9.
M. Nalbant, H. Gökkaya, and G. Sur, “Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning,” Mater Des, vol. 28, no. 4, pp. 1379–1385, 2007, doi: 10.1016/j.matdes.2006.01.008.
N. Lusi, D. Ridlo Pamuji, A. Fiveriati, A. Afandi, and G. Sandy Prayogo, “Application of Taguchi and Grey Relational Analysis for Parametric Optimization of End Milling Process of ASSAB-XW 42,” 2020.
A. Mufarrih, H. Istiqlaliyah, and M. M. Ilha, “Optimization of Roundness, MRR and Surface Roughness on Turning Process using Taguchi-GRA,” in Journal of Physics: Conference Series, Aug. 2019, vol. 1179, no. 1. doi: 10.1088/1742-6596/1179/1/012099.
R. M. Singari, R. M. S, and R. S. Mishra, “Optimization of Surface Roughness and Material Removal Rate on Conventional Dry Turning of Aluminium (6061),” 2014. [Online]. Available: https://www.researchgate.net/publication/261295511
S. S. Warsi, M. H. Agha, R. Ahmad, S. H. I. Jaffery, and M. Khan, “Sustainable turning using multi-objective optimization: a study of Al 6061 T6 at high cutting speeds,” International Journal of Advanced Manufacturing Technology, vol. 100, no. 1–4, pp. 843–855, Jan. 2019, doi: 10.1007/s00170-018-2759-2.
S. Sakthivelu, T. Anandaraj, and M. Selwin, “Multi-Objective Optimization of Machining Conditions on Surface Roughness and MRR during CNC End Milling of Aluminium Alloy 7075 Using Taguchi Design of Experiments,” 2017.
R. Pundir, G. H. V. C. Chary, and M. G. Dastidar, “Application of Taguchi method for optimizing the process parameters for the removal of copper and nickel by growing Aspergillus sp.,” Water Resour Ind, vol. 20, pp. 83–92, Dec. 2018, doi: 10.1016/j.wri.2016.05.001.
J. Z. Zhang and J. C. Chen, “Surface roughness optimization in a drilling operation using the taguchi design method,” Materials and Manufacturing Processes, vol. 24, no. 4, pp. 459–467, Apr. 2009, doi: 10.1080/10426910802714399.
H. Dave, S. Vallabhbhai, S. Kumar, and K. P. Desai, “Study on Micro Hole Accuracy and Electrode Depletion during Micro EDM process through Grey based Taguchi approach MACHINING OF CLOSED CONTOUR PROFILE ON CNC MILLING MACHINE View project Thermoacoustic View project,” 2013. [Online]. Available: https://www.researchgate.net/publication/236014396
D. Sukma Eka, A. Muhammad, and K. Herliansyah, “Optimasi Parameter Pengukuran Dimensi dan Defect Ubin Keramik dengan Metode Taguchi,” 2021.
E. Kuram and B. Ozcelik, “Multi-objective optimization using Taguchi based grey relational analysis for micro-milling of Al 7075 material with ball nose end mill,” Measurement, vol. 46, no. 6, pp. 1849–1864, Jul. 2013, doi: 10.1016/J.MEASUREMENT.2013.02.002.
N. S. Kumar, A. Shetty, A. Shetty, K. Ananth, and H. Shetty, “Effect of spindle speed and feed rate on surface roughness of carbon steels in CNC turning,” in Procedia Engineering, 2012, vol. 38, pp. 691–697. doi: 10.1016/j.proeng.2012.06.087.
N. Mohd Razali and Y. Bee Wah, Power comparisons of Shapiro-Wilk, Kolmogorov-Smirnov, Lilliefors and Anderson-Darling tests, vol. 2. 2011.
