An Implementation of Internet of Things for Digitalization of Kanban Production System
Abstract
Just-In-Time production system in the form of kanban has been implemented in many production processes in order to optimize the production output. Internet of Things (IoT) has been integrated into production system in digitalizing production processes as well as obtaining and gathering real-time information in the factory floor through sensors, actuators, and network. In this study, an application of IoT into kanban and production system was proposed. The proposed electronic kanban system composed of Radio Frequency Identification (RFID) cards and readers, QR code and reader, microcontrollers, digital displays, and server. In this system, the kanban card is replaced by an RFID card. All workstations in the production process are equipped by RFID readers, microcontrollers, and displays to show relevant instructions to the operator. The microcontrollers are connected to a server to send information of the RFID card scanned by them and the time when the card was scanned. The latter information is used for tracing each of the products produced in each of the workstations. The proposed electronic Kanban system was implemented to an assembling process consisting of 7 workstations. The system was able to replace the conventional kanban card with RFID and electronic displays and performing the unit tracing capability.
Downloads
References
Y. Monden, Toyota Production System - An Integrated Approach to Just-In-Time, New York: Taylor and Francis Group, 2012.
T. Cheng and S. Podolsky, Just-in-Time Manufacturing. An Introduction, London: Chapman & Hall, 1996.
J. Liker, The Toyota Way, Second Edition: 14 Management Principles from the World's Greatest Manufacturer, New York: McGraw Hill, 2020.
N. A. Pramudita, M. D. Prasetio and P. P. Suryadhini, "Perancangan Sistem Kanban untuk Mengurangi Keterlambatan Komponen Rear Spar," Jurnal Sistem Cerdas, vol. 6, no. 3, pp. 232 - 240, December 2023.
I. Kouri, T. Salmimaa and I. Vilpola, "The Principles And Planning Process Of An Electronic Kanban System," in 19th International Conference on Production Research, Valparaiso, 2009.
E. Ngai, K. K. Moon, F. J. Riggins and C. Y. Yi, "RFID research: An academic literature review (1995–2005) and future research directions," International Journal of Production Economics, vol. 112, no. 2, pp. 510-520, April 2008.
L. D. Xu, W. He and S. Li, "Internet of Things in Industries: A Survey," IEEE Transactions on Industrial Informatics, vol. 10, no. 4, pp. 2233-2243, November 2014.
Y. Zhang and F. Tao, Optimization of Manufacturing Systems Using the Internet of Things, London: Academic Press, 2017.
B. Artono, D. N. Prakoso and T. A. W. Lestari, "Sistem Monitoring Mesin Pengaduk Adonan Roti Otomatis berbasis Internet of Things (IoT)," Journal of Computer Science and Engineering, vol. 4, no. 1, pp. 25-41, February 2023.
Thamara, D. D. Damayanti and W. Juliani, "Rancangan Kanban Elektronik untuk Mereduksi Keterlambatan pada Proses Perakitan Komponen Rudder di PT Dirgantara Indonesia," e-Proceeding of Engineering, vol. 7, no. 2, pp. 6329-6340, August 2020.
S. Kumaraguru, B. Kulvatunyou and K. C. Morris, "Integrating Real-Time Analytics and Continuous Performance Management in Smart Manufacturing Systems," in IFIP International Conference on Advances in Production Management Systems, Ajaccio, France, 2014.
V. K. Manupati, G. D. Putnik, M. K. Tiwari, P. Ávila and M. M. Cruz-Cunha, "Integration of process planning and scheduling using mobile-agent based approach in a networked manufacturing environment," Computers & Industrial Engineering, vol. 94, pp. 63-73, April 2016.
L. Gopal, H. Singh, P. Mounica, N. Mohankumar, N. P. Challa and P. Jayaraman, "Digital Twin and IOT Technology for Secure Manufacturing Systems," Measurement: Sensors, vol. 25, pp. 63-73, February 2023.
P. N. Choiriyah, D. S. E. Atmaja and W. Juliani, "Perancangan Electronic Kanban Menggunakan Metode Constant Quantity Withdrawal System untuk Mengurangi Keterlambatan pada Assembly Junction di PT Dirgantara Indonesia," Performa: Media Ilmiah Teknik Industri, vol. 20, no. 2, pp. 149-166, 2021.
M. Achouch, M. Dimitrova, K. Ziane, S. Sattarpanah Karganroudi, R. Dhouib, H. Ibrahim and M. Adda, "On Predictive Maintenance in Industry 4.0: Overview, Models, and Challenges," Applied Sciences, vol. 12, no. 16, p. 8081, August 2020.
A. Rudi, D. Fivtriany, I. Fahmiruddin, M. Andy, M. Apriliyanto, O. Legi, T. Wijayanti and Y. Ramadhan, "Pengaplikasian Lean Manufacturing Menggunakan Metode Kanban Di PT X," Bulletin of Applied Industrial Engineering Theory, vol. 2, no. 2, pp. 124-128, September 2021.
M. T. Gonçalves and K. Salonitis, "Lean Assessment Tool for Workstation Design of Assembly Lines," Procedia CIRP, vol. 60, pp. 386-391, 2017.
M. R. Niza, D. S. E. Atmaja and W. Juliani, "Perancangan E-Kanban Menggunakan Metode CONWIP untuk Mengurangi Keterlambatan Pembuatan Part Area Machining pada PT Dirgantara Indonesia," e-Proceeding of Engineering, vol. 8, no. 6, pp. 12283-12297, December 2021.
C. Kumar and R. Panneerselvam, "Literature review of JIT-KANBAN system," International Journal of Advanced Manufacturing Technology, vol. 32, no. 3, pp. 393-408, February 2007.
A. Holovaty and J. Kaplan-Moss, The Definitive Guide to Django: Web Development Done Right, Apress, 2009.
